Unused Multi-function Hand Press Machine ★ Includes 2 types of riveting dies, 4mm round punch, striking tools, and round hole punch

Please check the profile section before purchasing (??????)
Please attach the handle after the product arrives. (See image 8)

★ When using, please fix it to the table or place a rubber mat underneath to prevent the press machine from moving and use with caution.

■ Product Contents (Image 1)
◎ Hand Press Machine
◎ 4mm interval, four-row hole round punch
Rubber base
◎ Dies
Rivet (6mm)
Rivet (10mm)
* Rivets are included as a small bonus.
* Although new, there may be discoloration or rust inherent to metal. Oil is also applied to prevent rust.
* The rubber for the rivets may have minor scratches that do not interfere with use.
◎ 5 types of round punches (bonus)
As shown in image 9
0.4mm, 0.7mm, 1.0mm, 1.3mm, 1.6mm
◎ Presser Foot (Seat 4x4)
* Please read the presser foot description below.
◎ Iron Plate
(The one in the image is for photography; a clean one will be sent.)
◎ Wood for use with presser foot
* Please use with felt attached to the back of the wood.
* This is wood that has been cut from wood stored at home.
★ About Hand Press Machine Dies
Can be widely used for jeans buttons, rivets, eyelets, snaps, etc.
* Depending on the size you use, you may need to purchase dies for rivets or snaps.
Standard Size
Upper die screw is 1.25 pitch M8
Please check the standard of the die screw.
If the screw standard does not match, it cannot be installed correctly.
* As the press machine is a painted product, there may be minor scratches.
┈┈┈┈┈┈┈┈┈┈
☆ Precautions before using the presser foot
Commercial metal press machines are tools for striking specific metal parts such as eyelets and rivets.
When punching larger than the die shape, you need to press in several places until you can feel the punching sensation.
* If the height of the die is too low to press, adjust the height by raising the base to control the pressing force.
* When using the press, if you are pressing something larger than the seat surface, or if the design would deform the seat surface,
use an acrylic plate or iron plate in between to enlarge the seat surface.
┈┈┈┈┈┈┈┈┈┈

#Leathercraft
#DiamondChisel
#Stamp
#Punch
#DieCutting
#GenuineLeather
#Eyelet
#HandPress
#Rivet
#Snap
#ChicagoScrew
#Tent
#CarSeat
#HandPressMachine
#SnapButton
#DoubleSidedRivet
#Wallet
#Purse